Introduction

Use profile for making standard setups of Phoenix.

Profiles are saved in files. These files can be shared with other users.

Used for flashing and writing serial numbers. AKA prommer.

The FPS-8C is a so called parallel version of FPS-8 (is able to flash 8 phones at a time).

SW in the box:

SW type

Prommer mode when updating

FPGA

Service mode

Application

Secondary boot

Normal mode

Algorithm

On, if a phone is On, if the FPS-8 is in Flashes slowly when erasing connected and the phone service mode flash. Flashes quickly when is turned off programming flash

On, if a phone is On, if the FPS-8 is in Flashes slowly when erasing connected and the phone service mode flash. Flashes quickly when is turned off programming flash

FPS_8 front panel

Was this article helpful?

0 0

Post a comment