Updating software

Choose Flashing -> FPS-8 Flash -> Mark both log flashing and Manual Selection. Then Click on Flash. Now in Flash file selection window, choose the product code. Select the correct file Now click on OK, and SW update starts. You will see as the 18 MB package goes into FPS-8 (If transfer is very slow, it is recommended that Parallel port is in ECP mode. Transfer in ECP mode is much faster). Ifyou do not know how to Change PC Parallel port mode from BIOS, contact your local support. And...

Power Distribution Control and Reset

All power (except backup battery power) is drawn from BL5-C Li-Ion battery located in the B cover. Current flows through ZOCUS current sense resister which is used for current measurement by ZOCUS and thus for remaining operating time estimation. CS7 board contains one power ASIC, UEM and discrete regulators needed for generating the different operating voltages. The discrete regulators consist of an SMPS to power UPPWD2 voltage core and two linear regulators. The first linear regulator...