Vpp Vppgnd Connector For Label Station

To speed up Flash-programming at the Label station in the Production, +12V for VPP and VPP_GND are accessible through the mechanic of the phone, when the battery is removed. The label from the Label-station hides the pads after use.

Table 3: VPP/VPP_GND Connector

Pin

Name

Parameter

Min

Typ

Max

Unit

Remark

J212

VPP

Flash Prog. Volt.

11.4

12.0

12.6

V

Intel Spec. (Worst-case)

J213

VPP_GND

0

0

V

Connect to GND when VPP= +12V

x201

QJ J213

Figure 3: X201 and VPP/VPPGND pad

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment