Mount lightguide in DCover

1. Place the lightguide in the D-Cover.

2. Push the lightguide down until retaining flaps snap on.

Note:Check thatthe speakeris mounted in the lightguide.

Fastening the Screws

Use a torx #6 screwdriver to fasten the screws. Max torque 18Ncm at 300RPM

Fastening the Screws

Use a torx #6 screwdriver to fasten the screws. Max torque 18Ncm at 300RPM

Mounting the Antenna

Place the antenna hooks in the D-Cover. Push down the antenna until it locks in the snap.

Mounting the Antenna

Place the antenna hooks in the D-Cover. Push down the antenna until it locks in the snap.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment