Mechanical Parts

All parts must be stored in the originally packaging wether it is Tape and Reel, Trays, Boxes or other similar packages and should stay there untill use. Recommended NMP storage conditions are 25°C + 5°C and relative humidity of 30°/o-60°/o. Please be aware that parts to be soldered onto the PCB ( Shields) have to be stored in such a way that the parts keep the Coplanarity.

Determination of coplanarity. deviation between all solderable areas/leads and seating plane (seating plane = reference plane formed by three lowest contact points when component lies on flat surface by its own weight).

Coplanarity specification: deviation max 0.15mm.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment