Electrical Specifications

Transceiver General Specifications

RX frequency band:

TX frequency band:

Power class:

Output power:

Duplex spacing:

Method of frequency synthesis:

Frequency control:

Receiver type:

Receiver IF:

Modulator type:

Number of RF channels:

Channel spacing:

Number of TX power levels:

Sensitivity:

Frequency error:

RMS phase error:

Transmission Specifications

TX frequency band: Modulator type: Power class: Output power: Power levels: Power level steps: Error at 2.0 W power : Error at other power levels: Frequency error: RMS phase error: Peak phase error:

0.02...2 W 45 MHz two digital PLLs VCTCXO two IF, linear 71 and 13 MHz I/Q modulator 124

200 kHz 11

890...915 MHz I/Q modulator 4

06/97JR

06/97JR

2-19

Technical Documentation

Copyright © Nokia Mobile Phones

Spurious emissions

• allocated a channel in freq.band:

• idle mode in frequency band:

• spurious for receiving band:

9 kHz... 1 GHz < -36 dB 1...12.75 GHz < -30 dBm 9 kHz... 1 GHz < -57 dB 1...12.75 GHz < -47 dBm 935...960 MHz < -84 dBm except for 5 channels

Reception Specifications

RX frequency band:

Type:

IFs:

Sensitivity:

AGC dynamic range:

Receiver gain (Voltage gain)

Input dynamic range:

Gain relative accuracy in receiving band:

Gain relative accuracy on channel:

935...960 MHz linear, two IF

71 and 13 MHz

-102 dBm RX channel input, I/Q S/N ratio > 8 dB, BN = 135 kHz

85 dB

66 dB

-102 dBm...-10 dBm 10 mVpp - 25 mVpp 1 dB (reported RXlevel) 1 dB within every 20 dB range

TECHNICAL ABSTRACT

06/97JR

TECHNICAL ABSTRACT

06/97JR

Technical Documentation

Copyright © Nokia Mobile Phones

Was this article helpful?

0 0

Post a comment